High Gain, Ultra-Low Noise Amplifier;
8.0 to 12.0 GHz
The GRF2710 is a high gain, low noise, linear amplifier designed for high performance 8.0 to 12.0 GHz applications. Over this frequency range, it exhibits excellent gain and compression point.
The device is operated from a single positive supply of 3.0 to 8.0 V with a typical bias condition of 5.0 V and 25 mA.
Product Categories
Markets
Applications
- X-Band Low Noise Amplifier
- Oscillator Amplifier
- LO Buffer
- Microwave Backhaul
- Satellite Receiver LNA
- RFID
Features
Reference: 5V/25 mA/11.0GHz
- Gain: 13.9 dB
- OP1dB: 13.0 dBm
- OIP3: 21.0 dBm
- EVB Noise Figure: 2.1 dB
- Internally Pre-Matched to 50 Ω
- Process: GaAs pHEMT
GRF-AN001: Designing for Low Noise and Excellent Matching in Amplifier Applications
GRF-AN002: Amplifier Design: Improving Gain Flatness Without Sacrificing Return Loss
GRF-AN003: Capitalizing on the Design Flexibility of Common Footprint DFN-6 Packages
GRF-AN004: Leveraging Differences in Packaging to Customize Amplifier Performance
GRF-AN005: Customizing an Amplifier's PSAT Output Level
GRF-AN006: Proper Procedures for Powering Up and Powering Down an RF Amplifier
GRF-AN007: Design Considerations for Ensuring Amplifier Stability
GRF-AN008: Is Matching the LNA Input for Γ OPT Always Worth the Effort?
GRF-AN009: Designing an Amplifier Lineup for SDARS Applications
GRF-AN010: Designing a High Performance, Single-SAW SDARS Solution
GRF-AN001: Designing for Low Noise and Excellent Matching in Amplifier Applications
GRF-AN002: Amplifier Design: Improving Gain Flatness Without Sacrificing Return Loss
GRF-AN003: Capitalizing on the Design Flexibility of Common Footprint DFN-6 Packages
GRF-AN004: Leveraging Differences in Packaging to Customize Amplifier Performance
GRF-AN005: Customizing an Amplifier's PSAT Output Level
GRF-AN006: Proper Procedures for Powering Up and Powering Down an RF Amplifier
GRF-AN007: Design Considerations for Ensuring Amplifier Stability
GRF-AN008: Is Matching the LNA Input for Γ OPT Always Worth the Effort?
GRF-AN009: Designing an Amplifier Lineup for SDARS Applications
GRF-AN010: Designing a High Performance, Single-SAW SDARS Solution
NOTE: Charts represent a compilation of datasets that may span more than one tuning configuration, and apparent discontinuities in the plots may result. Please note that alternative tunes will likely resolve any such irregularities in the plots. Contact [email protected] for further guidance.