SPDT Failsafe Switch
0.1 to 6.0 GHz
GRF6011W is a linear, ultra-low loss SPDT switch that has been designed with failsafe characteristics when all voltage inputs are removed. In switching mode, the device delivers IP1dB levels greater than 1 Watt along with >49 dBm IIP3 levels for both RF paths.
When powered down (Failsafe Mode), RFC to RF1 defaults to a high insertion loss while RFC to RF2 defaults to a low insertion loss state that retains high linearity.
With optimization of external components, the upper frequency range of the device can be extended to 6.0 GHz. Data plots using this high frequency tune are also included in this data sheet. Optimization for a particular band essentially involves selecting the optimal series capacitor values (M1, M4, M5) for the three RF ports.
The device is operated from a supply voltage of 3.0 volts to 5.0 volts with the single control input (VSEL) from 3.0 volts up to VDD.
Guerrilla RF has partnered with Modelithics to offer S-parameter and noise parameter models for packaged broadband ultra-low noise amplifiers. For more details, visit: https://www.modelithics.com/MVP/GuerrillaRF
- Signal Boosters/Repeaters
- Automotive Telematics
Path: RFC to RF1: (1.9 GHz); Vdd: 3.3V
- Insertion Loss: 0.43 dB
- IP1dB: 32.0 dBm
- IIP3: 49.5 dBm
- Failsafe Mode: High loss
Path: RFC to RF2: (1.9 GHz); Vdd: 3.3V
- Insertion Loss: 0.33 dB
- IP1dB: 30.5 dBm
- IIP3: 51.0 dBm
- Failsafe Mode: 0.4 dB loss
AEC-Q100 Grade 2 Qual Pending
- 100% Device Reflow at Assembly
- 100% Optical Die Inspection